Manfred Weber
Metra Mess- und Frequenztechnik in Radebeul e.K.
Since 1954

Deutsche Seiten Menu

Machine Monitoring

Topics: vibration meter, vibration analyzer, vibration severity meter, vibrometer, vibration frequency, vibration detector, vibration monitor, machine monitoring, condition monitoring, bearing condition, vibration switch, vibration frequency, vibration analyzer, wind energy, web-based vibration monitoring, vibration transmitter

Hand-Held Vibration Meters VMxx Series


VM22 VM23 VM24 VM25 VM31
Please click on pictures for more details
Measuring channels 1 1
1 1 4
Inputs L.P. IEPE + VMID L.P. IEPE + VMID L.P. IEPE + VMID L.P. IEPE + VMID L.P. IEPE + TEDS
Measuring ranges
Vibration acceleration - -
0.1 - 240m/s² 0.1 - 240m/s² 0.1 - 800 m/s²
Vibration velocity 0.1 - 1000mm/s 0.1 - 1000mm/s 0.1 - 1000mm/s 0.1 - 1000mm/s 0.1 - 10000 mm/s
Vibration displacement - 0.01 - 60 mm 0.01 - 60 mm 0.01 - 60 mm 1 - 15000 µm
Temperature - -
- -40 - 125 °C -
Rotary speed - -
- 1 - 9999 rpm -
Frequency ranges
Vibration acceleration - -
0.2 Hz - 10 kHz
3 Hz - 1 kHz
1 kHz - 10 kHz
0.2 Hz - 10 kHz
3 Hz - 1 kHz
1 kHz - 10 kHz
0.1 - 2000 Hz
1 - 1000 Hz
Vibration velocity 10 - 1000 Hz 2 - 100 Hz
10 - 1000 Hz
2 - 1000 Hz
10 - 1000 Hz /td>
2 - 1000 Hz
10 - 1000 Hz
1 - 100 Hz
2 - 1000 Hz
10 - 1000 Hz
Vibration displacement - 3 - 60 Hz
3 - 200 Hz
5 - 200 Hz 5 - 200 Hz 5 - 250 Hz
Other features
Human vibration measurement - -
- - yes
RMS measurement yes yes yes yes yes
Peak measurement - yes (pk-pk) yes yes yes
Crest factor measurement - -
- yes -
Vector sum (X/Y/Z) - -
- - yes
Main frequency -
yes
-
-
-
Bearing diagnostic coefficient K(t) - -
- yes -
Vibration dose value (VDV) - -
- - yes
Frequency analysis - 512 lines FFT for main frequency (no spectrum) - 125 lines FFT; 10 frequency ranges, 23 - 11712 Hz 125 lines FFT;4 frequency ranges, 240 - 1920 Hz
Headphone output - -
- yes -
Measurement memory 16000 measurements, USB interface 16000 measurements, USB interface 16000 measurements, USB interface 16000 measurements, USB interface 10000 measurements, USB interface
Accessories
Supplied accelerometer KS82L KS82L KS82L KS82L -
Sensor probe (option) -
Sensor solution A high temperature charge-mode accelerometer KS56 (up to 250°C) can be connected to the input of the hand-held vibration meters VM22/23/24/25 via the Pre-Amplifier Model VM2x-A. We recommend the 1.5 m sensor cable 009/T-UNF-UNF-1,5. VMID is not supported with this solution. for high temperatures up to 250°C
KS56 and
KS56 and
KS56 and
KS56 and

Data sheet VM2x (550 kB)
Data sheet KS82L (200 kB)
Instruction manual (3 MB)
USB Device Driver
Firmware update
Data sheet VM2x (550 kB)
Data sheet KS82L (200 kB)
Instruction manual(3 MB)
USB Device Driver
Firmware update
Data sheet VM2x (550kB)
Data sheet KS82L (200kB)
Instruction manual (4MB)
USB Device Driver
Firmware update
Data sheet VM2x (550kB)
Data sheet KS82L (200 kB)
Instruction manual (10MB)
USB Device Driver
Firmware update
Excel macro for FFT export
Data sheet VM31 (350 kB)
Instruction manual (3.5 MB)
USB Device Driver
Firmware update
Excel macro
PC software VM2x-Measurement Database (VM22 / 24 / 25)
.. add to memo list

Vibration Monitors NEW M14 M12
  • Monitoring of unbalance vibration to ISO 10816/ISO 20816
  • Monitoring of bearing vibration
  • Detection of particular vibration frequencies by FFT (M14)
  • Measuring ranges and filters adjustable
  • RMS and peak values
  • Inputs for IEPE transducers
  • USB and RS-485 interfaces for digital setup and measurement (M14)
  • Level indication at front side
  • Relay outputs with adjustable thresholds and delays
  • Isolated 4 .. 20 mA current loop
  • Wide-band output
  • Self-test functions
  • Teach-in for alarms (M14)
  • 35 mm DIN rail attachment
Please click for more details. Please click for more details.
Monitoring modes
  Time domain
  Frequency domain

RMS and peak value
FFT

RMS and peak-to-peak value
-
Monitored Measurands
  Vibration acceleration
  Vibration velocity
  Vibration displacement

yes
yes
-

yes
yes
yes
Frequency ranges
  Vibration acceleration
  Vibration velocity
  Vibration displacement

0.3 Hz .. 10 kHz
2 .. 1000 Hz
-

1 Hz .. 50 kHz
3 .. 1000 Hz
3 .. 200 Hz
High pass filters 0.3//5/10/20/50/100/200/500/1000 Hz; IIR; 2 poles High pass plug-in modules FB3-... (2 .. 1000 Hz available)
Low pass filters 0.1/0,2/0,5/1/2/5/10 kHz; IIR; 2 poles Low pass plug-in modules FB2-... (0,1 .. 50 kHz available)
Outputs Wide-band (AC); current loop; 2 relays Wide-band (AC); filtered (AC); RMS (DC); peak-to-peak (DC); current loop; 1 relay
Digital Interfaces USB (front); RS-485 (rear) -
Power supply 8 .. 30 VDC 12 .. 28 VDC
Downloads Data sheet (1.3MB)
Instruction manual (5 MB)
USB software for setup and measurement
Firmware update
Data sheet (1.2 MB)
Instruction manual (1 MB)
     
Add instrument and accessories to memo list
Web-based Vibration Monitoring NEW M14-WEB
  • Package of a PLC WAGO PFC200 with pre-installed software
  • 1 to 32 channels M14 can be added
  • Vibration monitoring in time and frequency domain
  • HTML5 webbrowser interface - no additional software needed on PC side
  • Remote display of RMS/peak, time graphs and FFT in browser window
  • All settings via web browser
Please click for more details.

M14-WEB screenshot
M14-WEB in action: See the web page of a real M14-WEB monitoring system with 6 channels
Notice: The PLC may be temporarily unavailable because of too many clients. Please try again later in such cases.
Monitoring functions RMS/peak (instantaneous, history, plot) of acceleration and velocity; FFT
Channel no. 1 to 32 M14 units
Data storage SD card
Interfaces 2 x Ethernet 10/100 Mbit/s (RJ45); RS-485 to M14 bus
Data sheet (2 MB>)
Instruction manual (5 MB)
WAGO PFC200 data sheet(1.5 MB)
WAGO PFC200 manual (6 MB)
Add instrument and accessories to memo list

8 Channel IEPE Conditioner
M208A
  • For piezoelectric accelerometers, force and pressure sensors and microphones with IEPE output
  • Suitable as signal conditioner, meter and monitor
  • Measurement of RMS and peak
  • Embedded web server for remote measurement and monitoring Example web page
  • Serial interface with PC software for setup and metering
  • High pass, low pass and integrator plug-in modules
  • TEDS support
  • Relay output
  • Shared output
  • Compact 19" rack case with low depth

M208A - All-In-One:

  • Signal conditioner with filters and integrators
  • RMS/Peak vibration meter
  • Vibration monitor with relay output
  • Web server for remote measurement

Gain
0.1 .. 1000, incremental
Frequency range
0.1 Hz .. 100 kHz
Readout display
4 digits; RMS or peak; 1 s multiplex; with mechanical unit
TEDS support
automatic transducer sensitivity normalization
Ethernet
embedded web server hosts HTML page for readout and setup, Example
RS-232 Interface
master and slave interface for PC control of up to 8 units by supplied control software or ASCII command set
Relay output
1 relay with adjustable threshold for each channel
High pass filter modules
FB3- 3 / 5 / 10 / 30 / 50 / 100 / 300 / 500 / 1000 Hz (Butterworth, 2nd order)
Low pass filter modules
FB2- 0.1 / 1 / 3 / 5 / 10 / 30 / 50 / 100 kHz (Butterworth, 4th order)
Integrator modules
single integrator 6 - 1000 Hz (FBV) and double integrator 6 - 200 Hz (FBD)
Connectors
8 BNC inputs; 8 BNC outputs; shared BNC output; Sub-D output
Power supply
10 - 28 VDC; mains plug adapter 115 / 230 VAC
Downloads Data sheet (400 kB)
Instruction manual M208A (1,5 MB)
M208A operating and measuring software for Windows PCs
Firmware update
Add instrument and accessories to memo list
   
Vibration Meter for Wind Turbines to VDI 3834-1 VM30-W
  • Versatile and economic tool for the evaluation of mechanical vibrations of onshore wind generators up to 3 MW with gears to VDI 3834, Part 1
  • Vibration measurement at tower, nacelle, rotor bearing, gear and generator with only one meter and one sensor
  • Triaxial Measurement
  • Measurement of vibration acceleration and vibration velocity from 0.1 Hz
  • Memory, PC interface


Please click for details.
Measuring range
Interval RMS of vibration acceleration 0.1 - 10 Hz: 0.010 m/s² - 40 m/s²
Running RMS of vibration acceleration 10 - 1000 Hz: 0.010 m/s² - 40 m/s²
Running RMS of vibration acceleration 10 - 2000 Hz: 0.010 m/s² - 40 m/s²
Running RMS of vibration acceleration 10 - 5000 Hz: 0.010 m/s² - 40 m/s²
Interval RMS of vibration velocity 0.1 - 10 Hz: 10 - 300 mm/s
Running RMS of vibration velocity 10 - 1000 Hz: 0.01 - 400 mm/s
Inputs
X / Y / Z, IEPE compatible
External connections
RS-232, analog outputs X / Y / Z, supply voltage
Downloads Data sheet (400 kB)
Instruction manual (600 kB)
Abstract VDI 3834 Part 1 (200 kB)
The latest version of the software for Excel import from the VM30-W can be found on our download page
Add instrument and accessories to memo list
Vibration Switches / USB Transmitter
VS10
VS11 VS12
Install,
press teach-in,
start monitoring.
 
  • Economic precision device
  • Machine condition monitoring
  • Quality control
  • Emergency shut-off
  • Setup via USB and PC tool
  • Shipped with customer settings on demand
VS12:
  • Compact and economic USB instrument for vibration measurement and recording in time and frequency domain
Highslide JS
Top view at cable gland
Bottom view with M8 stud bolt
Opened case with terminals
Setup software


Please click for details
Highslide JS
Top view at socket
Bottom view with M8 stud bolt
PC software: Settings for measurement and monitoring
PC software: Time domain measurement and recording
PC software: Frequency domain measurement (FFT) with limit curve
Measurands
RMS and peak value of
Acceleration or Velocity
RMS and peak value of
Acceleration or Velocity
RMS and peak value of
Acceleration or Velocity
Frequency range (max.)
0.1 Hz - 10 kHz 0.1 Hz - 10 kHz 0.1 Hz - 10 kHz
Filters
Programmable high pass and low pass filters
Programmable high pass and low pass filters Programmable high pass and low pass filters
Frequency domain measurement (FFT)
-
360 lines, 10 freely selectable frequency intervals with individual amplitude limits
360 lines, 10 freely selectable frequency intervals with individual amplitude limits
LEDs for warning and alarm
green/red
green/red -
Connectors
Screw terminals for supply (5-30 VDC) and Micro USB (internal) Screw terminals for supply (5-30 VDC) and Micro USB (internal) Binder 712 socket for USB, Relay and supply (5-30 VDC or USB voltage)
Mounting
M8 stud bolt
M8 stud bolt M8 stud bolt
Downloads Data sheet (350 kB)
Instruction manual (250 kB)
USB device driver
PC software
Firmware update
Data sheet (350 kB)
Instruction manual (700 kB)
USB device driver
PC software
Firmware update
Data sheet (350 kB)
Instruction manual (700 kB)
USB device driver
PC software
Firmware update
Add instrument and accessories to memo list
4-20 mA Vibration Severity Transmitter
KSI80VC20
KSI80VC40 KSI82VB20 KSI82VB40
Output
RMS of vibration velocity as 4-20 mA current loop
Measuring range
0.2 .. 20 mm/s
0.4 .. 40 mm/s 0.2 .. 20 mm/s 0.4 .. 40 mm/s
Linear frequency range (±3 dB) 1.5 .. 1000 Hz
1.5 .. 1000 Hz 10.. 1000 Hz 10 .. 1000 Hz
Protection grade
IP67
IP67 IP67 IP67
Connector
Binder 713, axial Binder 713, axial Binder 713, axial Binder 713, axial
Weight
66 g
66 g 66 g 66 g

Please click for details
Available with:


Notice: These transducers are not IEPE compatible.
Downloads Data sheet (250 kB)
Instruction manual (150 kB)
Add sensor and accessories to memo list